Shenzhen Huayuexin Precise Ware Co., Ltd.
Main products:Gear,Gear Box
Products
Contact Us
  • Contact Person : Mr. Xu JiangHua
  • Company Name : Shenzhen Huayuexin Precise Ware Co., Ltd.
  • Tel : 86-755-88841859
  • Fax : 86-755-25500780
  • Address : Guangdong,Shenzhen,ROOM1109,11TH FLOOR,EAST BlOCK,SHENZHEN DEPARTMENT STORE PLAZA, 123 SHENNAN EAST ROAD, LUOHU AREA, SHENZHEN,CHINA
  • Country/Region : China
  • Zip : 518000

20A 30A or 40A Electric Speed controller/ESC

20A 30A or 40A Electric Speed controller/ESC
Product Detailed
We can produce various speed controllers including, 3A ESC, 6A ESC, 10A ESC, 20A ESC, 30A ESC etc Input voltage—DC 6-16.8V(2-4S Lixx)BEC—5V  2ampRunning current—20A(Output— Continuous 20A, Burst 25A up to 10 Secs.)Size— 36mm (L) * 26mm (W) * 7mm (H).Weight— 22g. Programmable Items1. Brake Setting—Enabled / Disabled, default is Disabled2. Battery Type—Li-xx(Li-ion or Li-poly) / Ni-xx(NiMH or NiCd),default is Li-xx.3. Low Voltage Protection Mode(Cut-Off Mode)—Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off.                                                             4. Low Voltage Protection Threshold(Cut-Off Threshold) Low / Medium / High, default is Medium.1) For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V.2) For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells NiMH battery, fully charged voltage is 1.44*6=8.64V, when “Medium” cut-off threshold is set, the cut-off voltage will be:8.64*50%=4.3V.5. Startup Mode—Normal /Soft /Super-Soft, default is Normal.Normal is preferred for fixed-wing aircraft. Soft or Super-soft are preferred for helicopters. The initial acceleration of the Soft and Super-Soft modes are slower in comparison, usually taking 1 second for Soft startup or 2 seconds for Super-Soft startup from initial throttle advance to full throttle. If the throttle is closed (throttle stick moved to bottom) and opened again (throttle stick moved to top) within 3 seconds of the initial startup, the restart-up will be temporarily changed to normal mode to get rid of the chances of a crash caused by slow throttle response. This special design is very suitable for aerobatic flight when quick throttle response is needed.6. Timing—Low / Medium / High, default is Low. Usually, low timing value can be used for most motors. We recommend the Low timing value for 2 poles motor and Medium timing value for motors with more than 6 poles to get a high efficiency. For higher speed, High timing value can be chosen.

20A 30A or 40A Electric Speed controller/ESC



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.